RTCMultiConnection Server

Overview

TsgcWSAPIServer_RTCMultiConnection — RTCMultiConnection signalling server that pairs with the RTCMultiConnection JavaScript library for WebRTC. The component is part of the sgcWebSockets library.

At a glance

Features

• Native Delphi implementation with full ANSI/Unicode support.

Technical specification

Main properties

The principal published / public properties used to configure and drive the component. Consult the online help for the full list.

Main methods

The principal public methods exposed by the component.

Quick Start

Drop the component on a form, configure the properties below and activate it. The snippet that follows shows the typical Client AMQP Connect — Basic Usage configuration sourced from the online help.

Delphi (VCL / FireMonkey)

oAMQP := TsgcWSPClient_AMQP.Create(nil);
oAMQP.AMQPOptions.Locale := 'en_US';
oAMQP.AMQPOptions.MaxChannels := 100;
oAMQP.AMQPOptions.MaxFrameSize := 16384;
oAMQP.AMQPOptions.VirtualHost := '/';
oAMQP.HeartBeat.Enabled := true;
oAMQP.HeartBeat.Interval := 60;

oClient := TsgcWebSocketClient.Create(nil);
oAMQP.Client := oClient;
oClient.Specifications.RFC6455 := false;
oClient.Host := 'www.esegece.com';
oClient.Port := 5672;
oClient.Active := True;

C++ Builder

oAMQP = new TsgcWSPClient_AMQP();
oAMQP->AMQPOptions->Locale = "en_US";
oAMQP->AMQPOptions->MaxChannels = 100;
oAMQP->AMQPOptions->MaxFrameSize = 16384;
oAMQP->AMQPOptions->VirtualHost = "/";
oAMQP->HeartBeat->Enabled = true;
oAMQP->HeartBeat->Interval = 60;

oClient = new TsgcWebSocketClient();
oAMQP->Client = oClient;
oClient->Specifications->RFC6455 = false;
oClient->Host = "www.esegece.com";
oClient->Port = 5672;
oClient->Active = true;

.NET (C#)

oAMQP = new TsgcWSPClient_AMQP();
oAMQP.AMQPOptions.Locale = "en_US";
oAMQP.AMQPOptions.MaxChannels = 100;
oAMQP.AMQPOptions.MaxFrameSize = 16384;
oAMQP.AMQPOptions.VirtualHost = "/";
oAMQP.HeartBeat.Enabled = true;
oAMQP.HeartBeat.Interval = 60;

oClient = new TsgcWebSocketClient();
oAMQP.Client = oClient;
oClient.Specifications.RFC6455 = false;
oClient.Host = "www.esegece.com";
oClient.Port = 5672;
oClient.Active = true;

Common scenarios

The following scenarios are lifted verbatim from the online help. Each shows the configuration and method calls needed to drive the component through a specific real-world flow.

1 · Client AMQP1 Connect — Basic Usage

Connect to an AMQP 1.0.0 server without authentication. Define the AMQPOptions property values, virtual host and then set in the TsgcWebSocketClient the Host and Port of the server.

// Creating AMQP client
oAMQP := TsgcWSPClient_AMQP1.Create(nil);
// Creating WebSocket client
oClient := TsgcWebSocketClient.Create(nil);
// Setting WebSocket specifications
oClient.Specifications.RFC6455 := False;
// Setting WebSocket client properties
oClient.Host := 'amqp_host_address';
oClient.Port := 5672;
// Assigning WebSocket client to AMQP client
oAMQP.Client := oClient;
// Activating WebSocket client
oClient.Active := True;

// Creating AMQP client
oAMQP = new TsgcWSPClient_AMQP1(this);
// Creating WebSocket client
oClient = new TsgcWebSocketClient(this);
// Setting WebSocket specifications
oClient->Specifications->RFC6455 = false;
// Setting WebSocket client properties
oClient->Host = L"amqp_host_address";
oClient->Port = 5672;
// Assigning WebSocket client to AMQP client
oAMQP->Client = oClient;
// Activating WebSocket client
oClient->Active = true;

oAMQP = new TsgcWSPClient_AMQP1(this);
// Creating WebSocket client
oClient = new TsgcWebSocketClient(this);
// Setting WebSocket specifications
oClient.Specifications.RFC6455 = false;
// Setting WebSocket client properties
oClient.Host = "amqp_host_address";
oClient.Port = 5672;
// Assigning WebSocket client to AMQP client
oAMQP.Client = oClient;
// Activating WebSocket client
oClient.Active = true;

2 · Client MQTT Connect — Basic Usage

Connect to Mosquitto MQTT server using websocket protocol. Subscribe to topic: "topic1" after connect.

oClient := TsgcWebSocketClient.Create(nil);
oClient.Host := 'test.mosquitto.org';
oClient.Port := 8080;
oMQTT := TsgcWSPClient_MQTT.Create(nil);
oMQTT.Client := oClient;
oClient.Active := True;

procedure OnMQTTConnect(Connection: TsgcWSConnection; const Session: Boolean; const ReasonCode: Integer; 
 const ReasonName: string; const ConnectProperties: TsgcWSMQTTCONNACKProperties);
begin
oMQTT.Subscribe('topic1');
end;

oClient = new TsgcWebSocketClient();
oClient->Host = "test.mosquitto.org";
oClient->Port = 8080;
oMQTT = new TsgcWSPClient_MQTT();
oMQTT->Client = oClient;
oClient->Active = true;

void OnMQTTConnect(TsgcWSConnection *Connection, const bool Session, const int ReasonCode, 
 const string ReasonName, const TsgcWSMQTTCONNACKProperties *ConnectProperties);
{
oMQTT->Subscribe("topic1");
}

oClient = new TsgcWebSocketClient();
oClient.Host = "test.mosquitto.org";
oClient.Port = 8080;
oMQTT = TsgcWSPClient_MQTT.Create(nil);
oMQTT.Client = oClient;
oClient.Active = true;

void OnMQTTConnect(TsgcWSConnection Connection, bool Session, int ReasonCode, 
 string ReasonName, TsgcWSMQTTCONNACKProperties ConnectProperties);
{
oMQTT.Subscribe("topic1");
}

3 · Subscribe QoS = At Least Once

You can Subscribe to a Topic using method Subscribe from TsgcWSPClient_MQTT. This method has the following parameters:

MQTT.Subscribe('topic1', mtqsAtLeastOnce);

MQTT->Subscribe("topic1", mtqsAtLeastOnce);

MQTT.Subscribe("topic1", TmqttQoS.mtqsAtLeastOnce);

4 · Subscribe Topic

Subscribe to Topic "topic1" after a successful connection.

oClient := TsgcWebSocketClient.Create(nil);
oClient.Host := 'test.mosquitto.org';
oClient.Port := 8080;
oMQTT := TsgcWSPClient_MQTT.Create(nil);
oMQTT.Client := oClient;
oClient.Active := True;

procedure OnMQTTConnect(Connection: TsgcWSConnection; const Session: Boolean; const ReasonCode: Integer; 
 const ReasonName: string; const ConnectProperties: TsgcWSMQTTCONNACKProperties);
begin
oMQTT.Subscribe('topic1');
end;

oClient = new TsgcWebSocketClient();
oClient->Host = "test.mosquitto.org";
oClient->Port = 8080;
oMQTT = new TsgcWSPClient_MQTT();
oMQTT->Client = oClient;
oClient->Active = true;

void OnMQTTConnect(TsgcWSConnection *Connection, const bool Session, const int ReasonCode, 
 const string ReasonName, const TsgcWSMQTTCONNACKProperties *ConnectProperties);
{
oMQTT->Subscribe("topic1");
}

oClient = new TsgcWebSocketClient();
oClient.Host = "test.mosquitto.org";
oClient.Port = 8080;
oMQTT = TsgcWSPClient_MQTT.Create(nil);
oMQTT.Client = oClient;
oClient.Active = true;

void OnMQTTConnect(TsgcWSConnection Connection, bool Session, int ReasonCode, string ReasonName, 
 TsgcWSMQTTCONNACKProperties ConnectProperties);
{
oMQTT->Subscribe("topic1");
}

5 · Publish Messages

The method PublishMessages is used to send a message to the AMQP server.

AMQP.PublishMessage('channel_name', 'exchange_name', 'routing_key', 'Hello from sgcWebSockets!!!');

procedure OnAMQPBasicReturn(Sender: TObject; const aChannel: string; 
 const aReturn: TsgcAMQPFramePayload_Method_BasicReturn; 
 const aContent: TsgcAMQPMessageContent);
begin
DoLog('#AMQP_basic_return: ' + aChannel + ' ' + IntToStr(aReturn.ReplyCode) + ' ' + aReturn.ReplyText + ' ' + aContent.Body.AsString);
end;

AMQP->PublishMessage("channel_name", "exchange_name", "routing_key", "Hello from sgcWebSockets!!!");

private void OnAMQPBasicReturn(TObject *Sender, const string aChannel, 
 const TsgcAMQPFramePayload_Method_BasicReturn *aReturn, 
 const TsgcAMQPMessageContent *aContent)
{
DoLog("#AMQP_basic_return: " + aChannel + " " + IntToStr(aReturn->ReplyCode) + " " + aReturn->ReplyText + " " + aContent->Body->AsString);
}

AMQP.PublishMessage("channel_name", "exchange_name", "routing_key", "Hello from sgcWebSockets!!!");

private void OnAMQPBasicReturn(TObject Sender, const string aChannel, 
  const TsgcAMQPFramePayload_Method_BasicReturn aReturn, 
  const TsgcAMQPMessageContent aContent)
{
DoLog("#AMQP_basic_return: " + aChannel + " " + aReturn.ReplyCode.ToString() + " " + aReturn.ReplyText + " " + aContent.Body.AsString);
}

6 · Publish a simple message

You can publish messages to all subscribers of a Topic using Publish method, which has the following parameters:

MQTT.Publish('topic1', 'Hello Subscribers topic1');

MQTT->Publish("topic1", "Hello Subscribers topic1");

MQTT.Publish("topic1", "Hello Subscribers topic1");

Sources used to build this document

Every external claim links back to a primary source. The online-help references decode the canonical deep-link the company maintains for this component.